|
¡@ |
¡@ |
¡@
¡@
¡@
Specification
¡@
Magnetic Card Reader ( MSR )
Magnetic card reader
through all three interfaces can access " single / dual / triple
tracks " of magnetic card, which track2 bit density is 75 BPI,
track1/3 bit density is 210 BPI following ISO and JIS II
standard. The acceptable Coercivity of magnetic stripe is 300 Oe
to 4000 Oe.
MSR Card Swiped Speed
: 5 ¡V 50 inch/sec
Interface : PS2 /
RS232 / USB
¡@
i-Button
iButton key reader
through all three interfaces can read the serial number of
DS1990A
iButton key from Dallas Semiconductors.
¡@
IC
Chip card reader
through RS232 or USB interfaces can read/write ISO ID-1 size of
smart card which follow ISO7816 /EMV specification and most
popular synchronous chip cards ex. SLE4432/4442, SLE4418/4428
and SLE4436/6636.
Interface : RS232 /
USB
¡@
RFID
RFID reader through
RS232 or USB interfaces can Read/Write NXP¡¦s MF1 IC S50
contactless smart card or through PS2 interface to read card¡¦s
ID.
RFID Operation
Distance
RFID Distance: around 4cm
Interface : RS232 /
USB
¡@
Card dimension
85.6 x 53.98 x 0.76
(mm)
¡@
Head Duration
Magnetic head life is
over 1,000,000 cycles.
Chip card contactor
life is over 200,000 cycles.
¡@
LED Indicator
There is dual color LED indicators
used to indicate the status of the magnetic card,
chip card, iButton key and RFID operation.
¡@
Beeper
One short beep stands for operation success and three short beep
stands for operation fail.
¡@
Power Requirement
Voltage +5V D.C. +/- 5%, Current Consumption 300mA max
¡@
Interface Signal
RS232/USB port default protocol to communicate with host is 9600
bps, Even parity, 8 Data bit, 1 Stop bit. This baud rate can be
changed by command level, for all commands supported by
RS232/USB interface
¡@
Environment
EMC & Safety |
CE / FCC / LVD |
RoHS |
Compliant |
Operating Temperature |
0¢XC ~ 60¢XC |
Dimension (mm)
|
Cable Length 160cm / Size 131 x 52 x 37 mm |
Weight |
60g |
Wall Mount Support |
YES, VESA 75mm hole |
¡@
Support Mounting with POS / ITM Machine
IMS-300S
with Metal kit
¡@
|